The Ghost Immobiliser
Immobilisers can be a powerful weapon in the fight against car theft. They stop the car from being started without a key fob. They also work well to stop hotwiring and traditional forms of vehicle theft. Newer methods such as relay theft or key cloning are becoming more prevalent.
The Ghost Immobiliser is designed to combat these new trends and make your car inaccessible. It doesn't use LED indications or radio signals or key fobs, and is silent and discreet.
Easy to install
The Ghost Immobiliser, a revolutionary device, connects to the CAN data network of your vehicle in order to prevent key cloning or theft. linked website is a TASSA approved product and insurance companies have endorsed it. It operates silently and is almost undetectable to thieves. It makes use of buttons on your steering wheel, centre console and door panels to make a unique pin code sequence that has to be entered prior to being able to start your car. You can create up to 20 different sequences for increased security. The system is simple to install and doesn't require additional hardware.
It is recommended that you use an authorised installer of CAN immobilisers that is skilled in the specific type of vehicle you have to ensure the best results. Ideally, they will have a workshop in your local area to enable you to go and get your installation completed. They'll also have a range of tools and materials to assist you with the installation process. They will have basic hand tools, a multimeter and insulation tape and heat shrink tubing to protect the connections. A user manual will provide instructions specific to the wiring in your vehicle.
Connect the battery prior to beginning the installation process to avoid short circuits or airbag deployment. Double-checking the CAN L and H wires is vital, as incorrect identification can result in a faulty integration of the system. It is also a good idea to label or mark the wires. Finally, make use of a multimeter to confirm that the power source identified is able to provide a consistent 12V power supply.
Advanced thieves employ a variety of strategies to get around Ghost Immobilisers, including jamming or spoofing. These methods are based on amplifying the signal that is transmitted from your key fob to the vehicle's electronic control unit. However, with advanced anti-jamming technologies and a constant monitoring you can safeguard your vehicle from these sophisticated attacks.
Security Increased
Ghost immobilisers provide an extra layer of security to protect your vehicle from theft. It is a PIN code protection system that is entered using existing buttons on your steering wheel or dashboard, making it difficult for thieves to access the device and take your vehicle. The device is designed to be hidden in your vehicle. It doesn't have any LEDs, or other signals to alert a potential burglar to its presence. It communicates directly with the ECU of your vehicle via the data bus. This means that it isn't vulnerable to relay attacks or hacking.
It's a fantastic investment for those who have expensive vehicles, which are at higher chance of being stolen due to their value and the popularity of their vehicles. The enhanced features of the system protect your car from key copying and ECU swapping. Ghost immobilisers can be linked to an app, allowing you can easily arm and disarm them. They can also be equipped with the option of a service/valet mode, which allows you to temporarily disable them while your vehicle is being serviced or repaired.
Ghost immobilisers also have a wonderful benefit that it doesn't require any wire cutting. This is a nice feature, especially if own a brand newer vehicle that doesn't have built-in immobiliser technology. Certain systems also work with GPS tracking devices, providing additional security to your vehicle. A GPS tracker may also reduce your insurance costs. If you opt to purchase a ghost immobiliser be sure it is TASSA certified and a professional installer installs it for you.
Compatible with all major brands and models
The Ghost Immobiliser has been designed to work with all major models and makes, protecting your pride and joy from theft. It generates a unique pin number using buttons on your steering wheel, console or door panels. You must enter this code before you can drive. The system is tamper-proof unbreakable and comes with a three-year warranty. It is also fully certified by insurance providers, which means that it could help reduce your premiums.
Unlike the standard immobilisers, which use your key fob to control the car's ignition and ignition, the Ghost system is connected directly to the engine controller unit using the CAN data bus. This means it is secure from tampering, is nearly impossible to disable or remove and is not stolen by organised car thief criminal gangs. The Ghost system can also be integrated with an iPhone app to monitor remotely and management.
You can design a PIN that is simple to remember, yet mathematically unattainable to thieves. You can customize and change the PIN at any time to protect your vehicle even if it's located in a parking lot or on the street. You can also choose a valet or service mode in case you need someone else to drive your car for a brief period, for example when it's in the garage for servicing. This feature can also help keep your car from being taken by a dishonest mechanic. To ensure your security you can select a Ghost call alert to notify you if your car is moving or if it's moved.
Convenience
The ghost immobiliser is an effective security system, securing your vehicle from common methods of theft such as key cloning, key stealing and relay attacks. It connects to the car's CAN data network and preventing communication with the engine ECU. This makes it hard for thieves to hack or replicate your vehicle.
Once installed, you will be required to enter a PIN code that is up to 20 digits using the buttons on your dashboard and the steering wheel in order to start the engine. The system is completely hidden, and therefore undetectable by thieves. It does not emit radio frequency signals. It can be set up using a PIN code that can be changed by the user, adding to its security. The system is also designed to stop circuit cutting which makes it nearly impossible to hack into.
Certain systems let you connect directly to the immobiliser using an app on your smartphone, disarming it immediately when you forget your PIN. Some systems even have a service/valet setting that allows you to temporarily to start your car for example when you drop it off at valet or garage.
The Ghost Immobiliser is also inaccessible to thieves since it does not transmit radio signals. This is a significant advantage compared to other security systems that are sold aftermarket. It is also simple to use and doesn't require any complicated wiring. You can also use it together with a dash cam for additional security. This dash cam is the Thinkware F70, which features clear & crisp 1080p HD dashcam footage and Format Free Technology and parking mode. The system can also be wired for maximum performance and durability.
Installation
If you want to protect your vehicle from thieves, it's important to choose the right immobiliser. This device will prevent car thefts by preventing the communication between key fobs and the engine controller unit. This device stops thieves from stealing the signal to start your vehicle. It can also detect if it has been tampered and alert the vehicle owner.
The device is simple to install and works with the existing systems in your vehicle. It requires no modification to the wiring in your vehicle and can be tucked away in a secluded location, such as under the dashboard. To make sure that the device is properly installed, follow the instructions in the user's manual. It is also important to test the system after installing it. This will confirm that the immobiliser ghost is functioning in the way it is intended.
You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed in your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or bypass the system. The installation process usually takes between 2 and 3 hours.
It is recommended to consult the wiring diagram of your vehicle during the installation process. This will allow you to locate the CAN High and CAN Low wires that are required to connect your Ghost to the engine of your vehicle. It is also important to double-check the connections to make sure that they are secure and properly insulated.
Once the installation is complete and you are able to use the Ghost Immobiliser in normal operation. It will disable the ignition of your vehicle if you do not start it with the correct PIN, which is something you can enter yourself. The ghost of the immobiliser can be changed to Service/Valet Mode for when you need your vehicle serviced or valet parked.